TDX 20 has risen as a very efficient Freon replacement and commercial giants spread across several industries are of the very same opinion. The most prominent refrigerant based on the R-20 is R-22. It is known as Freon commercially and was destined to become the most widely used refrigerant across the world. To this day, it is seeing more and more production but that is primarily for developing countries that still rely on it for their HVAC and refrigeration needs.
Numerous Freon replacements have been underway and we can say this with much confidence that the target of the Montreal Protocol will be effectively achieved by 2020. The developed nations have taken it in their hands to eradicate the problem of ozone depletion which has been perpetuated by the pollutants discharged by Freon. Close to 200 countries have been a part of this protocol since 1987 and they are beginning to ban it because of its numerous negative effects on our environment.
CFCs were discovered in the 1930’s. The popularity of Freon climbed up the charts since then and continued to increase. These were much preferred in comparison to ammonia and other refrigerants because they were considered highly superior. Being non-toxic, and non-flammable, CFCs were able to maintain a high mass which clearly made them more efficient than the refrigerants we used previously.
These refrigerants were being used in many other applications as well because they could easily work as a solvent, and a propellant, or even as a fire extinguishing agent. In the beginning, it seemed like an all-rounder. It became a crucial tool for our growth and economic development but it had its drawbacks of which were not so aware.
Its production went on a massive scale and over the last several decades, we have already pumped more than a million tons of CFCs into our environment each year. Scientists soon realized that it reacted violently with ultraviolet rays. The millions of tons of CFCs that we dumped into the air surrounding us were destroying ozone molecules up in the stratosphere. A step had to be taken in the direction of preventing any more damage and so TDX 20 was born!
Numerous Freon replacements have been underway and we can say this with much confidence that the target of the Montreal Protocol will be effectively achieved by 2020. The developed nations have taken it in their hands to eradicate the problem of ozone depletion which has been perpetuated by the pollutants discharged by Freon. Close to 200 countries have been a part of this protocol since 1987 and they are beginning to ban it because of its numerous negative effects on our environment.
CFCs were discovered in the 1930’s. The popularity of Freon climbed up the charts since then and continued to increase. These were much preferred in comparison to ammonia and other refrigerants because they were considered highly superior. Being non-toxic, and non-flammable, CFCs were able to maintain a high mass which clearly made them more efficient than the refrigerants we used previously.
These refrigerants were being used in many other applications as well because they could easily work as a solvent, and a propellant, or even as a fire extinguishing agent. In the beginning, it seemed like an all-rounder. It became a crucial tool for our growth and economic development but it had its drawbacks of which were not so aware.
Its production went on a massive scale and over the last several decades, we have already pumped more than a million tons of CFCs into our environment each year. Scientists soon realized that it reacted violently with ultraviolet rays. The millions of tons of CFCs that we dumped into the air surrounding us were destroying ozone molecules up in the stratosphere. A step had to be taken in the direction of preventing any more damage and so TDX 20 was born!
Comments
Post a Comment